Trending Content

Fujifilm

By Becky McConnell

January 24, 2022

width=480

width=1284

OnsetX HS, the latest addition to the OnsetX printer series, offers increased print productivity, greater automation and reduced operator intervention, resulting in a significantly more productive printer.

The OnsetX HS presence is driven by three main attributes: quality, productivity and price. On the quality side, the 14 picoliter printheads offer the “sweet-spot” in print quality. The Onset class-leading image quality is attributed to Fujifilm Inkjet Technology integration including FUJIFILM Dimatix printheads and Fujifilm Uvijet inks. In addition to drop size, a full-width printhead array spans the entire width of the print bed, elimi-nating textural banding that is sometimes associated with traditional scanning print technology. Uvijet inks are formulated spe-cifically for the Onset to perform at high print speeds, and meet the performance demands across a wide range of substrates.

As for productivity, increases in productivity are an ongoing development requirement because burst capacity and expedited job turnaround time are increas-ingly important for anyone producing print.

From a pricing standpoint, as digital print for corrugated continues to grow, price sensitivity and competition continue to grow and standing out from the crowd becomes increasingly important.

Speed Matters.

One of the most alluring qualities of the OnsetX HS is that its features increase the headline productivity of the machine in all print modes, which means even greater print speeds from the same trusted printers. This is achieved by increasing the print jetting frequencies while ensuring print quality and stability are not compromised.

The HS also offers an optimized 2-pass print mode, titled “Single Cycle.” Jetting frequencies and drop placement have improved relative to the previous 2-pass, and the OX ink technology means adhesion to plastic media can be achieved in the “Single Cycle” mode.

The OnsetX HS also offers automated side shutters and automated table

skin adjustment. The OnsetX HS UV shutters are automatically adjusted dependent on media size. In the past, the operator would need to open the side of the machine and manually adjust the shutter on both sides of the machine. With additional automated features, the OnsetX HS is the pinnacle of productivity.

The automated table skin adjustment was previously a manual task, and as a result is rarely adjusted. By automating this process, zero-masking is much more achievable resulting in even fewer opera-tor interventions and therefore increased uptime and faster job turnaround.

With productivity and throughput as a priority, a key feature of the OnsetX HS is the 30 second set-up, which defines the time it takes to change job types in the new fully automated mode. This includes robot effector adjustments, table skin adjustments and side shutter adjustments, and cuts set-up time from 10-15 minutes down to 30 seconds, not including substrate stack changes. With the productivity potential to send your business to the next level, the OnsetX HS is revolutionizing wide format corrugated printing.


Becky is the Wide Format Inkjet Segment Manager, and has spent more than seven years at Fujifilm managing the WFIJ printing system solutions from entry-level to the most high productivity wide format equipment, as well as the digital UV inks that are integrated with these systems.

width=179Becky McConnell

Segment Marketing Manager, Wide Format Inkjet

rmcconnell@fujifilm.com

630-259-7253

https://www.fujifilmpackaginginsights. com/onsetx3-hs-c/